Advertisement
Quick Links
Attach the side channels
Slot the side channels onto the caps at either end of the blind, so that the blind runs down the insides of the channels.
Page 1 of 3
Left channel
Slot the rubber caps onto the bottoms of the side channels.
Top Tip
Ensure that the locking lever arm is loose, and the grip pad at the end of the headrail is flush
with the rail, before moving on to the next step.
Installation Guide
Full Blockout Honeycomb Blind
Right channel
Advertisement
Related Manuals for TUISS Full Blockout Honeycomb
Summary of Contents for TUISS Full Blockout Honeycomb
- Page 1 Installation Guide Full Blockout Honeycomb Blind Attach the side channels Slot the side channels onto the caps at either end of the blind, so that the blind runs down the insides of the channels. Left channel Right channel Slot the rubber caps onto the bottoms of the side channels.
- Page 2 Installation Guide Full Blockout Honeycomb Blind Fit the blind into the recess Raise the blind into the window recess. Leave a space of around 10mm between the front of the blind and the edge of the recess, so that there’s space to fit the pelmet on the front later.
- Page 3 Installation Guide Full Blockout Honeycomb Blind Fit the bottom bar and pelmet Insert the bottom bar into one of the side channels, with the bar angled up at the other end. Top Tip Again, ensure that the locking arm is raised and loose when you insert the bottom bar into the side channels.
Need help?
Do you have a question about the Full Blockout Honeycomb and is the answer not in the manual?
Questions and answers
how to adjust spring tension