Advertisement
Fitting the blind
Insert the blind into the recess at an angle and push the
tightener against the wall.
Make adjustments to the position of the blind so that it is straight and level, before locking it in place.
Right Control
Tightener on the left
Top Tip
Make sure that you tighten the wheel as much as you possibly can so that the blind remains secure and does not slip.
Right Control
Tightener on the left
Lift the control end of the blind until level and release
Left Control
Tightener on the right
Left Control
Tightener on the right
Installation Guide
Easi-Fit Roller Blinds
pressure, the blind will hold itself in place.
Hold the blind securely in place and turn the
tightening wheel to tighten the blind in place.
Turn the wheel clockwise relative to the roller tube.
Once the blind is secured in place, turn the end cap
until it locks against the tightening wheel. This will
lock the tightening wheel in place.
Turn the cap anti-clockwise relative to the roller
tube.
Advertisement
Table of Contents
Related Manuals for TUISS Easi-Fit
Summary of Contents for TUISS Easi-Fit
- Page 1 Installation Guide Easi-Fit Roller Blinds Fitting the blind Insert the blind into the recess at an angle and push the Lift the control end of the blind until level and release tightener against the wall. pressure, the blind will hold itself in place.
- Page 2 Installation Guide Easi-Fit Roller Blinds Child Safety Cord Tensioner The cord retaining device must be installed at the maximum distance possible from the control mechanism to prevent looped cords from becoming slack. Place the retaining device on the wall and mark the position of the screw hole(s) with a pencil.
Need help?
Do you have a question about the Easi-Fit and is the answer not in the manual?
Questions and answers