Safety Precautions ■ Please read this manual carefully before use and keep it properly. ■ This product is only for household use, not suitable for other places. ■ A grounded socket with a rated current of more than 10A must be used, and the plug must be inserted tightly.
mode. ■ Short press in cooking mode to return to standby mode. "Right" key Right basket selector button with indicator light. "Left" key Left basket selector button with indicator light. "Sync Finish" key Allows for cooking two different dishes in each basket that finish at the same time for convenience.
Page 5
■ During the working process, adjust the temperature, adjust the time, press the start/pause button to confirm or 5 seconds without operation to confirm automatically (press the pause during the work, and then adjust the time and temperature, if you don't press the start button, it stays in the setup interface, and confirms the parameter after 5 seconds but doesn't work automatically).
Page 6
will be working at the new temperature and time, blinking key is always on. ■ Cooking process press the pause button, both sides are suspended, and then press the start button, both sides start working. ■ Press the start key to work, can not switch to other functions, can only adjust the temperature and time of the current function.
blinking pause, can not work, unless you press start to work. ■ Two baskets work, point in one side, then press pause, corresponding to one side blinking pause, can not work; then point in the other side, then press pause, corresponding to the other side is also blinking pause, can not work;...
Page 8
The ingredients are fried Certain types of ingredients need Ingredients that lie on top of or across each other unevenly in the AIR to be shaken halfway through the (e.g. fries) need to be shaken halfway through the FRYER. preparation time preparation time.
Page 9
Left basket sensor open circuit (3 The stop action does not seconds in accept key operations. self-test mode, 3 seconds after 1 minute of work process) Left basket sensor short-circuit (NTC reaches 261°C; The stop action does not accept key operations. self-test and non-self-test status check 3...
Page 10
Power board Power Detect power board The stop action does not detects board communication accept key operations. communication defective circuits abnormality Power The power The stop action does not Detect the power board board has not accept key operations. board defective passed zero.
Need help?
Do you have a question about the R-2809 and is the answer not in the manual?
Questions and answers