Safety Precautions ■ Please read this manual carefully before use and keep it properly. ■ This product is only for household use, not suitable for other places. ■ A grounded socket with a rated current of more than 10A must be used, and the plug must be inserted tightly.
Key Function Description "Function key": Press the "Function" key to select Air Fry, Bake, Cupcake, Fries Roast, Reheat, Custom, Chicken function, the corresponding indicator lights up, and then press the start key again, and the Air Fryer automatically enters the cooking state. "Open key"...
■ Switch to power saving mode after a 10-minute pause. ■ After the function ends, End will be displayed, and it will switch to power saving mode after 30 seconds or switch to standby mode after removing the fry basket within 30 seconds.
Page 6
displayed for 30 seconds, then standby for 30 seconds). Press the function button to select the fries preset function, the cooking time is 18 minutes by default, and the Adjustable time: 1 temperature is 180℃ by default. Press the time setting minute-1 hour, step button and the temperature setting button to adjust the time 1-minute, adjustable...
Page 7
Press the function button to select the chicken function, the cooking time is 25 minutes by default, and the temperature Adjustable time: 1 is 200℃ by default. Press the time setting button and the minute-1 hour, step temperature setting button to adjust the time or temperature. 1-minute, adjustable After the setting is completed, press the start/pause button temperature 75-200℃,...
Tips - Small ingredients usually require a slightly shorter preparation time than larger ingredients. - A larger amount of ingredients only requires a slightly longer preparation time - A smaller amount of ingredients only requires a slightly shorter preparation time. - Shaking smaller ingredients halfway during the preparation time optimizes the result and can help prevent unevenly fried ingredients.
Troubleshooting Problem Possible cause Solution The appliance is not plugged in. Put the mains plug in an earthed wall socket. The AIR FRYER does not You haven't pressed the start Press the start/power button after you set the work. button. temp&time or choose the quick recipe.
Page 10
Sensor failure protection When the temperature sensor fails, the digital tube displays an error code and beeps 10 times, the prototype cannot perform any work, and does not respond to any keys. Once in the protected state, it cannot respond to any keystrokes even if the hardware is faulty. The system must be reset after the fault has been removed.
Need help?
Do you have a question about the R-2807 and is the answer not in the manual?
Questions and answers