IMPORTANT SAFEGUARDS Before using the electrical appliance, the following basic precautions should always be followed including the following: 1. Read all instructions. 2. Before using check that the voltage of wall outlet corresponds to the one shown on the rating plate. 3.
Page 3
be thoroughly dried before next use to prevent electric shock. 22. To prevent fire, do not place the appliance close to flammable materials such as curtains, and do not place anything above the appliance. 23. Make sure all papers, cardboard or plastic have been removed before frying food. 24.
KNOW YOUR AIR FRYER Top lid Upper housing Control panel Wire rack Lower housing Frying tank CONTROL PANEL...
Page 5
INTRODUCTION FOR OPERATING MODES The appliance has two operating modes including “Default mode” and “Custom mode”. 1. Default mode Connect the appliance with power source, press the Power button “ ” and the appliance enters into the “Default mode”, then press the Menu button “ ”...
INTRODUCTION FOR MENUS Ingredient Default Suggested Shake Remark temperature cook time 200℃ Frozen French 15-20mins Shake Adjustable time: 1-60mins fries 200℃ Chop 15-20mins Shake Adjustable time: 1-60mins 180℃ Bake 30mins Adjustable time: 1-60mins 200℃ Chicken leg, 25-40mins Shake Adjustable time: 1-60mins chicken wing 200℃...
Page 7
OPERATION INSTRUCTION NOTE: Make sure all the packaging materials are removed before adding food. The frozen food needs to be preheated. And please immediately cook the food which has been defrosted. French fries 1. Connect the appliance with power source. Press the Power button “ ”...
Page 8
Menu button “ ” to select the “Bake” “ ”, and the default temperature and time of “Bake” setting are 180℃ and 30 minutes separately, which are indicated in the display. And you can adjust your desired temperature and time by following the operation specified in the section of “Custom mode”, and the display will indicate the new temperature and time.
Page 9
you can adjust your desired temperature and time by following the operation specified in the section of “Custom mode”, and the display will indicate the new temperature and time. 2. Put the wire rack into the frying tank and then evenly add a layer of fishes on the wire rack.
Shrimp 1. Connect the appliance with power source. Press the Power button “ ” and then press Menu button “ ” to select the “Shrimp” “ ”, and the default temperature and time of “Shrimp” setting are 180℃ and 12 minutes separately, which are indicated in the display. And you can adjust your desired temperature and time by following the operation specified in the section of “Custom mode”, and the display will indicate the new temperature and time.
Page 11
IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service.
Need help?
Do you have a question about the R-2818 and is the answer not in the manual?
Questions and answers