Panasonic Lumix DMC-FZ20 Operating Instructions Manual page 69

∫ Setting the White Balance manually
(White set
Use this mode when you want to set the
white balance manually.
1 Set to [ ] (White Set) and then
press 1.
2 Aim the camera at a sheet of white paper
or a similar white object so that the frame
on the center of the screen turns white
and then press 1.
WHITE SET
SET
∫ Finely Adjusting the White Balance
(White Balance Fine Adjustment
When you cannot acquire the desired hue
by setting the white balance, you can adjust
the white balance finely.
1 Set the white balance to [
[ ]/[ ]/[ ]. (P68)
2 Press 3 several times until
[WB ADJUST.] appears.
WB ADJUST.
RED
SELECT
Recording pictures (advanced)
)
CANCEL
MENU
]/[ ]/
BLUE
EXIT
3 Finely adjust the white balance.
• 1 [BLUE]: Press when the hue is
reddish.
• 2 [RED]: Press when the hue is
bluish.
About the white balance
• When taking a picture with the flash, the
white balance will be automatically
adjusted [except for [
[ ] (Flash)], but the white balance may
not be properly adjusted if the photo flash
is insufficient.
About the white balance fine adjustment
• The white balance icon on the screen
turns red or blue.
• You can set the value independently for
each of the modes in white balance.
)
• The setting on the fine adjustment of the
white balance is reflected to the picture
when taking a picture with the flash.
• When you set the white balance using the
White set [
set to "0".
• When the color effect is set to any of
[COOL], [WARM], [B/W] or [SEPIA] (P75),
you cannot finely adjust the white balance.
] (Daylight) and
], the adjustment level is
69