Panasonic Lumix DMC-FZ20 Operating Instructions Manual page 114

Conditions
Both ends of the picture
recorded by setting the
picture size to [HDTV]
(1920k1080 pixels) are
cut out.
Colors that were actually
not around the subject
appear on the picture.
The flash is activated
2 times.
Even if the zoom lever is
rotated, the zoom
function is stopped
halfway.
114
Others
When you order photo studios to print pictures, ask the photo
studio if the pictures can be printed with both ends.
• When using the printer with a trimming feature or other
feature which cuts out both edges of the pictures, cancel
the feature for printing. The feature depends on the printer
used.
• Refer to the operating instructions of the printer for details.
This camera compensates the color shift caused by the
characteristic of the lens. However, the color shift may
appear when you rotate the zoom lever to Tele, etc.
This is not a malfunction.
The first flash is activated for red-eye prevention on the
subject (red-eye phenomenon). 1 second after, the flash is
activated again for recording.
Is [CONVERSION] set in the [REC] mode menu? If so, the
zoom range is limited. Cancel the setting on
[CONVERSION]. (P79)
Causes