Panasonic Lumix DMC-FZ20 Operating Instructions Manual page 21

Panasonic lumix dmc-fz20: operating instruction
Table of Contents

Advertisement

∫ Temporarily storing the lens hood
1 Remove the lens hood, reverse it
and then attach it again.
1 Place the camera upside down.
2 Catch the hook on the lens
hood adaptor.
3 Push the lens hood.
4 Align the marks as illustrated.
5 Tighten the screw.
1
4
• Check if the screw is loose and then
attach the lens hood.
• Do not tighten the screw too much.
Preparation
2
3
5
2 Attach the lens cap.
• Do not take a picture while the lens
hood is temporarily stored.
• Ensure that the lens cap is firmly
attached.
• When taking pictures with flash with the
lens hood attached, the lower portion of
the photo may turn dark (vignetting effect)
and the control of the flash may be
disabled because the photo flash may be
obscured by the lens hood. We
recommend detaching the lens hood.
• When using the AF assist lamp in the
dark, detach the lens hood.
• For details on how to attach the MC
protector and the ND filter, refer to P104.
• If any of the accessories are lost, please
contact Panasonic's parts department at
1 800 833-9626 (For USA) or
1 800 561-5505 (For Canada) for
chargeable replacement.
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents