Confirming Clip Information; Adding A Shot Mark To A Clip - Panasonic AG-HMC40 Operating Instructions Manual

Confirming clip information

You can confirm and view information related to
clips.
Press the T (+) zoom button (or zoom lever) while
displaying the thumbnail screen to display clip
properties.
Clip information screen
1
2
3
1
Clip number
2
Thumbnail (Thumbnail screen: Page 65)
3
Clip information
Displays indicators attached to clip, and
various other information.
START TC: Time code value at start of
recording
START UB: User information value at
start of recording
DATE/TIME: Date of recording at time at
start of recording
TIME ZONE: Displays time zone.
DURATION: Clip length
FORMAT: Recording format

Adding a SHOT MARK to a clip

Adding a SHOT MARK (
find the clips you are looking for.
1
Press the T (+) zoom button (or zoom lever)
to change the thumbnail screen to 1 clip
display.
2
Touch or to select the clip for which a
SHOT MARK will be added.
3
Press the USER button to which the
SHOT MARK function has been allocated.
(Page 106)
To remove a SHOT MARK, repeat the above steps.
• It is not possible to add shot marks to clips
recorded using a consumer camcorder model.
) will make it easier to
M
69