Setup | Security - Optoma GT360 User Manual

SETUP | Security

Pass-code default

value is "1234" (first
time).
Security
On: Choose "On" to use security verification when the turning

on the projector.
Off: Choose "Off" to be able to switch on the projector without

password verification.
Security Timer
Can be select the time (Month/Day/Hour) function to set the
number of hours the projector can be used. Once this time has
elapsed you will be requested to enter your password again.
Change Password
First time:

1. Press " " to set the password.
2. The password has to be 4 digits.
3. Use number button on the remote to enter your new
password and then press "
password.
Change Password:

1. Press " " to input old password.
2. Use number button to enter current password and then
press " " to confirm.
3. Enter new password (4 digits in length) using the number
buttons on the remote, then press "
4. Enter new password again and press "
User Controls
" key to confirm your
" to confirm.
" to confirm.
33
English