Connecting the AV receiver—Continued
Connecting a Satellite, Cable, Terrestrial Set-top box, or Other Video Source
With this hookup, you can use your satellite or cable receiver to listen to your favorite TV programs
Hint!
via the AV receiver, which is useful if your TV has no audio outputs.
Step 1: Video Connection
Choose a video connection that matches the video source (
You must connect the AV receiver to your TV with the same type of connection.
Step 2: Audio Connection
Choose an audio connection that matches the video source ( ,
• With connection
• To enjoy Dolby Digital and DTS, use connection
and
.)
c
Connection
COMPONENT VIDEO IN 2 (CBL/SAT)
A
B
a
DIGITAL IN COAXIAL 2 (CBL/SAT)
b
DIGITAL IN OPTICAL 1 (TV/TAPE)
c
c
b
A
Connect one or the other
Connection
c
must be
assigned (see page 43)
30
, you can listen to and record audio from the video source or listen in Zone 2.
a
AV receiver
CBL/SAT IN V
CBL/SAT IN L/R
OPTICAL
COAXIAL
Y
OUT
OUT
COMPONENT VIDEO OUT
or
, and then make the connection.
)
A
B
, or
a
b
c
or
. (To record or listen in Zone 2 as well, use
b
c
Signal flow
⇐
⇐
⇐
⇐
⇐
L
R
P
P
AUDIO
B
R
OUT
Satellite, cable, set-top box, etc.
), and then make the connection.
Video source
Component video output
Composite video output
Analog audio L/R output
Digital coaxial output
Digital optical output
a
VIDEO
OUT
and
, or
a
b
a
B
C