Onkyo TX-SR507 Instruction Manual page 18

Connecting the AV receiver—Continued
■ TX-SR507
The following illustration shows which speaker should be connected to each pair of terminals for 7.1-channel playback .
If you're using only one surround back speaker, connect it to the SURR BACK L terminals.
L
Surround
AUDIO
back right
INPUT
speaker
Connect your Power amplifier's analog audio output jacks to the AV receiver's PRE OUT:SURR BACK L/R jacks with
an audio cable.
■ TX-SR577
The following illustration shows which speaker should be connected to each pair of terminals for up to 7.1-channel playback.
If you're using only one surround back speaker, connect it to the SURR BACK L terminals.
Note:
The speakers are configured by using the "Speaker Settings" on page 40 and "Speaker Setup" on page 66.
18
R
Power amplifier
Front high
left speaker
Surround
back left
speaker
Front right
speaker
Surround Surround
back left back right
speaker speaker
Front high Front left
right speaker speaker
Surround left
Surround right
speaker
speaker
Front left Center
speaker speaker
Surround Surround
left right
speaker speaker
Front right
Center
speaker
speaker