Table of Contents
Advertisement
Adjust the settings for the functions while referring to "Using the Menu" (p. 3).
Make the settings for the functions while referring to "Using the Menu" (p. 3).
To play back camera images on a TV
1 Connect the TV and camera.
Connect to the TV video
input jack (yellow) and
audio input jack (white).
2 Use the camera to select the same video signal system as the one of connected TV ([NTSC]/
[PAL]).
3 Turn on the TV, and change "INPUT" to "VIDEO (an input jack connected to the camera)".
For details on changing the input source of the TV, refer to the TV's instruction manual.
4 Set the mode dial to q, and use 789: to select the image for playback.
Depending on the TV's settings, the displayed images and information may be cropped.
Displaying grid lines [FRAME ASSIST]
x SETUP
FRAME ASSIST
Submenu 2
OFF (No grid
Grid lines (square/diagonal) are
lines displayed)/
displayed on the LCD monitor as
w/x
guides for composing the image.
"Changing the shooting information
display" (p. 25)
Connector cover
AV cable (supplied)
Application
Multi-connector
Displaying the brightness distribution
[ u ]
x SETUP
u
Submenu 2
OFF
No histogram is displayed.
A histogram (a brightness
distribution as a guide for
ON
determining the exposure) is
displayed.
White-out areas are displayed
as red, and black-out areas are
DIRECT
displayed as blue directly on the
image.
"Changing the shooting information
display" (p. 25), "Changing the image
information display" (p. 29)
Application
EN
61
61
Advertisement
Table of Contents
