Download Print this page

Stafix M3.2 Installation And Operating Instructions

Mains powered energiser

Advertisement

Quick Links

TM
Mains Powered Energiser
Installation and Operating
Instructions
PULSE
POWER
MAINS POWERED ENERGISER
M3.2
Models
M2.4
M1.2
230 V NZ
WARNING: Read all instructions

Advertisement

loading
Need help?

Need help?

Do you have a question about the M3.2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Stafix M3.2

  • Page 1 Mains Powered Energiser Installation and Operating Instructions PULSE POWER MAINS POWERED ENERGISER M3.2 Models M2.4 M1.2 230 V NZ WARNING: Read all instructions...
  • Page 2 Ideally Stafix Earth System earth rods or Stafix earth kits should be used, but galvanized pipe or steel posts will usually suffice. Earth rods should be driven 2 m (6.5 ft) into the soil and spaced at least 3 m (10 ft) apart.
  • Page 3 Connect the earth and fence Connect the energiser Earth terminal (green) to your earthing system, preferably using a length of 2.5 mm (12.5 gauge) Stafix underground cable. Connect the fence to the Fence full power terminal (red). The Fence reduced power terminal (yellow) can be connected to fences where full power is not required (eg.
  • Page 4 The sign should display the symbol below or the words “Electric Fence”. Warning signs manufactured to international safety standards for this purpose are readily available from all Stafix distributors. Electric fence energisers are not intended for use by young children or infirm persons.

This manual is also suitable for:

M2.4M1.2