Function shooting (black & white/sepia)
1
Press the shutter button fully to take
the picture.
• Pressing the shutter button halfway locks
the focus and exposure.
• The self-timer lamp lights for approximately
10 seconds, then starts blinking. After
blinking for approximately 2 seconds, the
picture is taken.
• To cancel the self-timer, press the N
button.
• The self-timer mode is automatically
canceled after one shot.
Note
• If sequential shooting is attempted in self-timer mode, the camera shoots 5
frames at most regardless of the setting.
5
Function shooting (black & white/sepia)
This feature lets you add a special black & white or sepia effect to your
pictures.
Mode dial
Top menu
[MODE MENU]
WHITE] / [SEPIA] / [OFF]
Note
• White balance, white balance compensation and saturation cannot be used
during function shooting.
78
[CAMERA]
[FUNCTION]
Self-timer lamp
[BLACK &
g"Menus" (P.16)