Face Down Stacker; Face Up Stacker - Oki MC560n User Manual

The multi purpose tray can feed paper widths as small as 4.1339
inches (105mm) and lengths up to 47.244 inches (1200mm)
(banner printing).
For paper lengths exceeding 14 inches (356mm) (Legal 14in.)
use paper stock between 24 lb and 34 lb. (90g/m² and 128g/m²)
and the face up (rear) paper stacker.
Use the multi purpose tray for printing on envelopes and
transparencies. Up to 50 sheets of transparencies or 10
envelopes can be loaded at one time, subject to a maximum
stacking depth of 0.3937 inches (10mm).
Watermarked or headed paper should be loaded print side up and
top edge into the MFP.
F
ACE DOWN STACKER
The face down stacker on the top of the MFP can hold up to 250
sheets of 20 lb (80g/m²) standard paper and can handle paper
stocks up to 32 lb. (120g/m²). Pages printed in reading order
(page 1 first) will be sorted in reading order (last page on top,
facing down).
F
ACE UP STACKER
The face up stacker at the rear of the MFP should be opened and
the tray extension pulled out when required for use. In this
condition paper will exit via this path, regardless of driver
settings.
The face up stacker can hold up to 100 sheets of 20 lb (80g/m²)
standard paper, and can handle stocks up to 54 lb (203g/m²).
Always use this stacker and the multi purpose feeder for paper
stocks heavier than 32 lb. (120g/m²).
Getting started > 24