Midea MDRB380FGE User Manual page 13

Changing the light
• Any replacement or maintenance of the LED lamps is intended to be made by
1. Please take out the plug before removal.
2. Remove the lampshade with a screwdriver.
3. Take down the lamp panel.
4. Remove the connection terminal.
Connecting the appliance
Before initial start, keep the refrigerator still for two hour before connecting it to
power supply.
ATTENTION
Before putting any fresh or frozen foods, the refrigerator shall have run for 2-3 hours, or for
above 4 hours in summer when the ambient temperature is high.
Tips for energy saving
• The appliance should be located in the coolest area of the room, away from heat
producing appliances or heating ducts, and out of the direct sunlight.
• Let hot foods cool to room temperature before placing in the appliance.
Overloading the appliance forces the compressor to run longer. Foods that freeze
too slowly may lose quality, or spoil.
• Be sure to wrap foods properly, and wipe containers dry before placing them in the
appliance.This cuts down on frost build-up inside the appliance.
• Appliance storage bin should not be lined with aluminum foil, wax paper, or paper
toweling. Liners interfere with cold air circulation, making the appliance less effcient.
• Organize and label food to reduce door openings and extended searches. Remove
as many items as needed at one time, and close the door as soon as possible.
10
EN