Page 1
AUTOMATIC COFFEE MACHINE - BEAN TO CUP SLIMISSIMO Instruction Manual 20200...
Page 2
IMPORTANT INFORMATION For safety purpose you should read the instructions carefully before using the appliance for the first time. Save the instructions for future reference. The appliance is designed for domestic use and may only be operated in accordance with these instructions for use. Always handle with care and warn other users the potential danger.
Page 3
DO NOT’S 1. Do not allow children to touch the appliance or the power cord during the operation 2. Do not use an extension power cord set unless competent authority has approved it. 3. Do not leave the appliance unattended, when it is connected to main supply. 4.
GET TO KNOW YOUR AUTOMATIC COFFEE MACHINE GENERAL DESCRIPTION 1. External Drip Tray 7. Coffee Beans Container Cover 2. Internal Drip Tray 8. Water Tank 3. Coffee Grounds Container 9. Brewer 4. Adjustable coffee spout 10. Service Door 5. Control Panel 11.
CONTROL PANEL Flashing: Low water level/ Water tank Lights up stably: Requires to do missing descaling Flashing: Descaling is under process Lack of bean Empty System Function is running Lights up stably: coffee grounds container is full Power ON/OFF Button Flashing: coffee grounds container is Hot Water Button missing...
MACHINE INSTALLATION 150 mm 150 mm 150 mm 150 mm 1. Remove any protective films, stickers and any other packing material on the appliance 2. Choose a safe and stable surface with an easily reachable power supply and allow minimum distance from the sides of the machines (Figure 1). 3.
DAILY OPERATION MAKING YOUR COFFEE 1. Switch on the appliance by pressing the power on/off button. The appliance is then in the standby condition. 2. Place a cup under the coffee spout and adjust the height of the spout the fit the cup.
FILLING THE WATER TANK When is flashing, the water tank is in low water level and requires filling the water tank. Lift the water tank by using the lid as the handle 2. Rinse the water tank with fresh water and then fill the tank to the level and place it back into the machine.
HOT WATER The appliance can dispense hot water by simply pressing the hot water button. The hot water button will be flashing and the illumination will lights up indicates that the appliance is heating up the water. When the hot water button stops flashing and the illumination turn off, the water is ready to serve.
FURTHER SETTING ADJUSTIING THE VOLUME OF YOUR COFFEE/HOT WATER You can memorize your desired volume of coffee for both strong espresso and mild espresso and also the hot water from 25ml to 250ml. 1. When making your coffee (either strong espresso or mild espresso) or dispensing hot water, press and hold the button you selected.
1. When the machine is in standby condition, press and holds the for 5 seconds. 2. The will then be flashing and the following button will have the following indications 3. For different settings: Hot water button Strong espresso button Mild espresso button In ECO Mode Lights ON...
8. When all the water in the water tank is being dispensed out, and strong espresso button will be flashing. Fill the water tank with water until the max position. When water is filled into the water tank, will goes off. 9.
(1/2 half part of button). The appliance takes too - Excessive scale has built up. - Descale the appliance. long time to warm up. SCOTT 1 avenue de l’Europe - 01100 OYONNAX - France www.scott-gear.fr...
Need help?
Do you have a question about the SLIMISSIMO 20200 and is the answer not in the manual?
Questions and answers