NEC VT800 User Manual page 106

Selecting Aspect Ratio and Position for Screen [SCREEN]
SCREEN TYPE ....... Select one of two options: 4:3 SCREEN or WIDE SCREEN for the screen to be used. See also [ASPECT
RATIO].
(→ page 80)
POSITION .............. This feature allows you to adjust the vertical position of the image when WIDE SCREEN has been se-
lected for the screen type.
When WIDE SCREEN has been selected there is no-signal area above and below the image.
NOTE: This option is available only when [WIDE SCREEN] is selected in [SCREEN TYPE].
NOTE:
• After changing the screen type, check the setting of [ASPECT RATIO] in the menu. (→page 80)
• [POSITION] is not available when [4:3 SCREEN] is selected for [SCREEN TYPE] or when [LETTERBOX] is selected for [Aspect
Ratio].
Blanking area or no-signal area
94
6. Using On-Screen Menu