NEC VT800 User Manual page 100

Setting a new program timer
1. On the PROGRAM TIMER screen, use the SELECT ▲ or
TER button.
The [PROGRAM LIST] screen will be displayed.
NOTE: When the Program Timer is turned on, the [PROGRAM LIST] cannot be edited.
2. Select a blank program number and press the ENTER button.
The [EDIT] screen will be displayed.
3. Make settings for each item as required.
ACTIVE .................. Place a check mark to enable the program.
DAY ....................... Select days of the week for the program timer. To execute the program from Monday to Friday, select
[MON-FRI].To execute the program in everyday basis, select [EVERYDAY].
TIME ...................... Set the time to execute the program. Enter time in 24-hour format.
FUNCTION ............. Select a function to be executed. Selecting [POWER] will allow you to turn on or off the projector by
setting [ADVANCED SETTINGS]. Selecting [SOURCE] will allow you to select a video source by setting
[ADVANCED SETTINGS].
ADVANCED SETTINGS . Select power on/off or a type of video source for the selected item in [FUNCTION].
REPEAT ................. Place a check mark to repeat the program continuing basis . To use the program this week only, clear
the check mark.
button to select [SETTINGS] and press the EN-
88
6. Using On-Screen Menu