Pc Control Connector (D-Sub 9P) - NEC NP2150 User Manual

PC Control Connector (D-SUB 9P)

1 2 3
6 7
NOTE 1: Pins 1, 4, 6 and 9 are no used.
NOTE 2: Jumper "Request to Send" and "Clear to Send" together on both ends of the cable to simplify cable connection.
NOTE 3: For long cable runs it is recommended to set communication speed within projector menus to 9600 bps.
to txd of PC
to rxd of PC
to gnd of PC
4 5
8 9
to rts of PC
to Cts of PC
18
9. Appendix