Advertisement
Quick Links
PowerForce Helix
No Suction or Low Suction
Filters & Dirt Tank
Hose
Lower Hose
Are the filters and dirt tank clean?
If:
Then:
Yes • Make sure the filters are clean and dry.
Make sure the dirt tank is empty by pressing the dirt tank release button over
a trash can.
BISSELL Confidential
2111F
Advertisement
Related Manuals for Bissell PowerForce Helix
Summary of Contents for Bissell PowerForce Helix
- Page 1 PowerForce Helix 2111F No Suction or Low Suction Filters & Dirt Tank Hose Lower Hose Are the filters and dirt tank clean? Then: Yes • Make sure the filters are clean and dry. Make sure the dirt tank is empty by pressing the dirt tank release button over a trash can.
- Page 2 Remove the hose where it attaches to the lower hose on the lower back Check of the vacuum. Turn the unit on and feel for suction. Remove the hose where it attaches to the back of the vacuum by twisting ¼ turn to the left. BISSELL Confidential...
- Page 3 Next, run a broomstick through it to remove any clogs or obstructions. Continue troubleshooting Back to top Is the lower hose clogged? Then: To check: Unplug the vacuum and remove the screw on the lower back of the machine holding the lower hose in place. BISSELL Confidential...
- Page 4 Pull the lower hose flat to the ground Yes - Clogged Insert a broomstick to push any clogs thru. BISSELL Confidential...
- Page 5 If other steps have not resolved the issue, BISSELL Consumer Care: please refer to the product changeover guide. External Support: Contact BISSELL. Back to top BISSELL Confidential...
Need help?
Do you have a question about the PowerForce Helix and is the answer not in the manual?
Questions and answers