Page 1
BEFORE USE: Please read the instructions carefully. You must inspect the appliance including its cable and plug for any signs of damage. If the product is damaged, DO NOT USE and contact your supplier immediately for refund or replacement. This product is only suitable for well insulated spaces or occasional use.
Remove the packing and make sure that the appliance is intact. If there is any doubt concerning the Thank you for choosing the Mylek glass panel heater. integrity of the unit do not use the appliance and contact our Please take time to carefully read and understand the entire recommended after-sales service.
Page 3
INSTRUCTION MANUAL FOR MODELS install correctly and securely to a wall, as shown in this and clean the appliance or perform user maintenance. user manual. • CAUTION - Some parts of this product can become very • WARNING: Do not use this heater in small rooms when hot and cause burns.
INSTRUCTION MANUAL FOR MODELS at all times. Not following correct guidance and training THIS PRODUCT IS FOR ROOM HEATING could result in the unit overheating system activating, risk of FOR HOUSEHOLD USE ONLY fire, injury or even death. WARNING: this product should only be installed in Zone 2 | SPECIFICATIONS and above only if fitted in a bathroom according the national Model No.
INSTRUCTION MANUAL FOR MODELS | INSTALLATION ON THE WALL top of the heater body onto the hanging bracket. It is good practice to try attaching the hanging bracket to the heater and taking off, so you are familiar with how it at- taches and detaches.
INSTRUCTION MANUAL FOR MODELS | HOW TO USE | FUNCTIONS SETTING EXPLAINED • Plug the appliance into a AC 230V 50-60Hz socket and the unit will “beep” once. The indicator light illuminates for standby mode. Press to enter mode selection. By pressing , heating mode runs in a continuous cycle as below: •...
INSTRUCTION MANUAL FOR MODELS :(Saturday-Sunday) Unadjustable program. Note: After setting heating mode for hour 23, press to come back to day setting. Note: when screen displays , press finish all setting with display of (Figure 3) Note: For example, if set Comfort mode when the screen display , it means 00:00am –...
INSTRUCTION MANUAL FOR MODELS Select your country code, enter your mobile number and select "Get" to receive a press on APP UI. message containing your verification code. Enter your verification code and select "Login". | PAT TESTING When first using the App to turn on the heater, the WiFi indicator light will flash on the unit, to connect the unit to the App.
Page 9
INSTRUCTION MANUAL FOR MODELS Quick connection : Normal connection : Turn on your bluetooth in you mobile phone, then set as following steps. If the bluetooth is not on, pls follow the next step. Press “+” in the right-top Choose small home Select 2.4 GHz WiFi Pls ensure the wifi logo position and go to next...
Page 10
INSTRUCTION MANUAL FOR MODELS UI interface : 14:58 14:58 MYLEK Temperature Setting Temperature set MYLEK Windows open °C Temperature correction Temperature Correction Room temperature 18°C 12:56 Off Timer Display on/off Quick set 1 & 2 Quick Set 1 Quick Set 2...
INSTRUCTION MANUAL FOR MODELS Information requirements for electric local space heaters Model identifier(s): MY284859 / MY284860 Item Symbol Value Unit Item Unit Heat output Type of heat input, for electric storage local space heaters only (select one) This marking indicates that this product should not be disposed with other household Nominal heat output Manual heat charge control, with integrated wastes throughout the EU.
Page 12
Hygiene Supplies Direct Limited, Ground Floor, Tayson House, Methley Road Castleford, West Yorkshire, WF10 1PA declares that the Mylek Heaters are exclusively manufactured and imported for Hygiene Supplies Direct Ltd.
Need help?
Do you have a question about the MY28485 and is the answer not in the manual?
Questions and answers