Subscribe to Our Youtube Channel
Related Manuals for Becker BTH-BKR
Summary of Contents for Becker BTH-BKR
- Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 BTH-BKR HANDS FREE, MUSIC STREAMING INSTALLATION GUIDE FOR BECKER AUX READY RADIOS...
-
Page 2: Installation
Introduction Safety comes first when you’re on the road, so having an intuitive and easy to use Bluetooth kit is essential to reducing driver distraction. The BTH-BKR (formerly A2DIY-BKR) works with virtually all Bluetooth enabled phones and sounds great whether using for mobile conversations, streaming music, charging and AUX playback. - Page 3 5. For Cascade radios (e.g., BE6111, BE6112, BE7941 etc.) with factory Hands-Free Kit and/or Ferrari with radio cluster display, Warning: Most Becker radios are coded and will not operate without the otherwise proceed to step 6 code. Do not proceed to step 4 if radio code is not available otherwise radio...
- Page 4 6. Disconnect factory 8-pin BLACK plug from radio (See Fig. 5) BMW and Mercedes solid 16-pin plug Warning: BMW and Mercedes factory plug has a solid (molded) 16-pin speaker/power (A/B) plug. For these applications harness seen in Fig. 6a is included. Disconnect factory 16-pin (solid plug) from radio (See Fig.
- Page 5 Optional USB extension cable installation Please note: Optional USB dash mount extension cable is not required for operation; however, it extends USB charging port (See Fig. 11) to dashboard, glovebox etc. and USB port supports software updated and charging only Drill a ¾”...
-
Page 6: Wireless Remote Control
Wireless remote control Use included wireless remote control to track up/down, answer/reject calls, adjust device volume all while keeping eyes on the road. Installation: Attach button to steering wheel or dashboard using included double-sided tape. The 433 MHz frequency means the remote is ready for use once battery has been installed. - Page 7 Radios with ☼ button: (i.e., BE6104) Enable AUX menu option : This important step (enabling AUX menu option) is required for the BTH-BKR to function. Most Becker radios are pre-programmed to recognize a CD changer Turn radio “ON” connection and because of that you must perform the following steps to change 2.
- Page 8 Turn right hand rotary control/push button OK counterclockwise until system settings appear at the top right of the display Becker 4775 (Land Rover Traffic Pro) Press right hand rotary control/push button OK Turn right hand rotary control/push button OK to select External...
-
Page 9: Bluetooth Pairing
Becker DTM /High speed (e.g., BE-7892, BE7910) Bluetooth pairing Pairing varies among devices but basic steps are the same. This process is done upon initial install and will not have to be repeated. Turn ignition and radio “ON” Press Sound button for more than 2 seconds Bluetooth Settings 2. -
Page 10: Bluetooth Operation
Congratulations, you’ve just updated your vehicle to support new technology while preserving the original radio and dash components. Enjoy! The BTH-BKR works in vehicles with analog radios. Newer vehicles with fiber optic digital systems (e.g., CR23/24, PCM2+) as seen in Fig. 16 are NOT supported. - Page 11 Frequent ask questions & Troubleshooting Do I require a working CD changer for the BTH-BKR to work? CD changer (if present), must be disconnected. To retain CD changer functionality, purchase our BTH-BKRCD 2. Does the BTH-BKR work on all Becker radios? Works on Becker radios with AUX menu option and excludes digital systems (e.g., PCM2+, CDR-23/24 etc.) –...
Need help?
Do you have a question about the BTH-BKR and is the answer not in the manual?
Questions and answers