Becker BT-BKRMTCK Quick Start Installation Manual

For motorola and parrot

Advertisement

Quick Links

Courtesy of: DiscountCarStereo.com
Serving the internet community since 1995
|
This radio is for illustration purposes only
BT-BKRMTCK
Quick start installation guide for Motorola and Parrot
Created June 19, 2015
Revised: June 10, 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BT-BKRMTCK and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Becker BT-BKRMTCK

  • Page 1 Courtesy of: DiscountCarStereo.com Serving the internet community since 1995 This radio is for illustration purposes only BT-BKRMTCK Quick start installation guide for Motorola and Parrot Created June 19, 2015 Revised: June 10, 2020...
  • Page 2 Introduction: The BT-BKRTMCK Bluetooth harness is designed exclusively for the installation of Motorola and Parrot Bluetooth Car Kits to Becker Radios with “PHONE” menu option. These radios are typically found in older European vehicle such as BMW, Ferrari, Mercedes and Porsche including the popular Traffic Pro, CR-22, CDR-22, CR-220, CDR-220, CR-210* and CDR-210*.
  • Page 3 Motorola TK30 Connect BT-BKRTMCK 24-pin Molex plug (See Fig. 4) to Motorola TK30 24-pin Molex connector. 2. Proceed to “Bluetooth audio installation” below Fig. 5 Bluetooth Music Streaming If Bluetooth kit supports music streaming, the following must be observed: Fig. 4 Radios with existing CD Changer/iPod Adapter or Aux: Parrot CK &...
  • Page 4 Radios with TP button: (i.e. CDR-220) Fig. 6 Turn radio "ON" 2. Press and hold the "TP" button for about 8 seconds until Becker 1 is displayed. 3. Turn the Tuning Knob until AUX OFF is displayed. 4. Press either button located directly under the Arrows on the display to change the present setting from OFF to ON.
  • Page 5 Turn radio ON. Becker 4775 (Land Rover) & Other Traffic Pro Press and hold the ☼ button for 8 seconds, until Becker 1 is displayed. Turn the Tuning Knob until AUX OFF is displayed. Press either button located directly under the Arrows on the display to change the present setting from OFF to ON Turn Radio back “ON”...
  • Page 6 “ON” Press the CD button repeatedly until “AUX” is displayed The setting is store automatically Becker DTM /High speed (i.e. BE-7892, BE7910) Cascade Pro (i.e. BE7941) Press the Sound button for more than 2 seconds To activate the External Device mode Press multifunction button “AUX”...
  • Page 7 Motorola TK30 or Parrot MKi9100 etc.) requires disconnecting the CD changer, Auxiliary or iPod adapter Disclaimer • This product has no affiliation with Porsche, Becker or Apple • We’re not liable for misuse of this product. Email support@discountcarstereo.com ©...

Table of Contents