Table of Contents
Advertisement
Picture Controls
Adjusting Picture Settings
Using OSD Menu
.
Various picture adjustments can be set using the Picture Adjustment OSD menu.
Press the
control. Use
option from the menu and press key to
confirm selection.
Various picture settings are available from the
PICTURE menu. Use
option that you wish to adjust and press key
to confirm selection.
Notes:
!
H-Position, H-Size, V-Position, V-Size
adjustments are only available in RGB, DVI,
and Component video input modes.
!
To restore picture settings to factory
default, simply press the RECALL key from
the remote control when the PICTURE
menu is displayed.
A small display window appears upon selecting
the option to change. Use
setting. As you change the setting, changes in
the picture are immediately reflected in the
video picture. After achieving desired setting,
press
key to confirm setting and return to
previous menu.
Explanation of Various Picture Control Settings
Explanation of each available picture control settings are listed in the table below.
CONTRAST
Adjust Contrast to increase or decrease the level of white in the video picture. Increasing contrast
will make white areas of the video picture brighter. Contrast works in conjuction with Brightness.
34
on the front panel or remote
to select the PICTURE
to select the
to change the
Recall Key
Advertisement
Table of Contents
