Subscribe to Our Youtube Channel
Related Manuals for Stealkey Customs SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB
Summary of Contents for Stealkey Customs SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB
- Page 1 Assembly Instructions SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB SKU: SW10156 EAN: 4260754980881...
-
Page 2: Table Of Contents
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions Table of Contents 1. Packaging content warning/accessories 2. Installing D5 and DDC pump 3. Configuration with 2 radiators 4. Flow Diagram 5. Installing the Distrobution Plate 6. Dimensions in millimeter (mm) with D5 Pump 7. -
Page 3: Packaging Content Warning/Accessories
Stealkey Customs assumes no liability, express or implied, for damage to your components resulting from the use of Stealkey Customs cooling pro- ducts, whether due to errors or omissions on our part in the instructions below, or due to errors or defects in Stealkey Customs cooling products. -
Page 4: Installing D5 And Ddc Pump
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions Installing D5 and DDC pump Step 1: Remove the 4 x M4 x 20 mm screws (2,5 mm hexagon socket). Set the screws aside as they will be needed to secure the pump. Hexagon socket 2,5 mm Step 2: Now remove the D5 ring. - Page 5 SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions Step 3: Installing the D5 pump. Place the D5 ring over the pump and place it on the adapter. Tighten the screws with 2.5 Nm. Handle with care when tightening; acrylic can crack. Do not overtighten the screws to avoid cracks in the acrylic glass.
-
Page 6: Configuration With 2 Radiators
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions PLANNING THE WATER CIRCUIT FOR 2 RADIATORS A configuration with 2 radiators is shown here. Close any unused ports with the provided plugs. RADIATOR TOP FILL Port INLET RADIATOR TOP OUTLET CPU OUTLET CPU INLET... - Page 7 SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions Screw Screw connection connection 140 mm (140 Fan) 120 mm (120 Fan) DRAIN PORT...
-
Page 8: Flow Diagram
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions Flow Diagram (Front View) -
Page 9: Installing The Distrobution Plate
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions INSTALLING THE DISTRIBUTION PLATE STEP 1 Carefully insert the distributor plate into the Case and align the fixing holes preci- sely. Take care not to scratch the acrylic! STEP 2 With the included M4 screws, you can mount the distro plate directly to any standard fan bracket. -
Page 10: Dimensions In Millimeter (Mm) With D5 Pump
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions Dimensions in millimeter (mm) with D5 Pump... -
Page 11: Mounting Holes Dimensions
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions MOUNTING HOLES DIMENSIONS... -
Page 12: Installing The Connections
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions CONNECTING THE D-RGB CABLE Connect the D-RGB cable to a compatible motherboard (3-Pin ARGB Connector). INSTALLING THE CONNECTIONS Mount the connections with G1/4 thread and close the remaining connections with sealing plugs. -
Page 13: Support And Service
SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB Assembly Instructions Support and Service Contact Stealkey Customs Mail: support@stealkeycustoms.de Instagram: https:/ /www.instagram.com/stealkeycustoms Website: https:/ /www.stealkeycustoms.de FAQ: https:/ /www.stealkeycustoms.de/pages/faq...
Need help?
Do you have a question about the SK-Crossflow II PC-O11 EVO RGB Distro Plate D-RGB and is the answer not in the manual?
Questions and answers