Stealkey Customs assumes no liability, express or implied, for damage to your components resulting from the use of Stealkey Customs cooling products, whether due to errors or omissions on our part in the instructions below, or due to errors or defects in Stealkey Customs cooling products. Do not disassem- ble the distro plate.
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL INSTALLATION MANUAL DIMENSIONS (mm) FRONT SIDE 28.7 23.91...
Page 5
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL BACK 47.5 18.5...
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL INSTALLATION MANUAL FLOW DIAGRAM...
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL INSTALLATION MANUAL RECOMMENDED DISTRO PLATE CONFIGURATION A configuration with 3 radiators is shown here. Close any unused ports with the provided plugs.
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL FRONT VIEW FILL PORT (DRAIN PORT IN INVERT CONFIG) DRAIN Port (FILL PORT IN INVERT CONFIG)
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL INSTALLATION MANUAL INSTALLING THE D5 OR DDC PUMP STEP 1 Remove the 4 x M4 x 20 mm screws (2,5 mm hexagon socket). Set the screws aside as they will be needed to secure the pump.
Page 10
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL STEP 3 Installing the D5 pump. Place the D5 ring over the pump. Make sure the supplied o-ring is in the nut before installing the pump through the d5 ring on the adapter. Tighten the screws with 0,3 - 1,5 Nm. Handle with care when tightening.
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL INSTALLATION MANUAL INSTALLING THE DISTROBUTION PLATE STEP 1 Position the distribution plate into the PC Case and align the fixing holes precisely.
Page 12
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL STEP 2 Secure the distribution plate using the saved Side panel screws. The screws shouldn’t be over-tightened to avoid cracking the acrylic. Do not overtighten the screws to avoid cracks in the acrylic glass .
SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB INSTALLATION MANUAL INSTALLATION MANUAL CONNECTING THE D-RGB CABLE Connect the D-RGB cable to a compatible motherboard (3-Pin ARGB Connector) .
Need help?
Do you have a question about the SK-Crosscool III Lian Li O11 DYNAMIC EVO RGB Distroplate D-RGB and is the answer not in the manual?
Questions and answers