MSI K8NM-FISR User Manual page 51

Onboard Serial Port 1/2
Select an address and corresponding interrupt for the first/second serial port. The
settings are: [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [2F8/IRQ3], [Disabled] and [Auto].
Onboard Parallel Port
There is a built-in parallel port on the on-board Super I/O chipset that provides Standard,
ECP, and EPP features. It has the following options:
[Disabled]
[3BC/IRQ7]
[278/IRQ5]
[378/IRQ7]
Parallel Port Mode
SPP : Standard Parallel Port
EPP : Enhanced Parallel Port
ECP : Extended Capability Port
ECP + EPP: Extended Capability Port + Enhanced Parallel Port
Normal
EPP Mode Select
The onboard parallel port is EPP Spec. compliant, so after the user chooses the
onboard parallel port with the EPP function, the following message will be displayed
on the screen: "EPP Mode Select." At this time either [EPP 1.7] spec or [EPP 1.9] spec
can be chosen.
ECP Mode Use DMA
The ECP mode has to use the DMA channel, so choose the onboard parallel port with
the ECP feature. After selecting it, the following message will appear: "ECP Mode Use
DMA." At this time, the user can choose between DMA channel [3] or [1].
Line Printer port 0
Line Printer port 2
Line Printer port 1
BIOS Setup
3-15