MSI 925XE Neo Platinum User Manual page 58

MS-7053 ATX Mainboard
Video Off In Suspend
This option enables the monitor to be turned off during the suspend mode. Setting
options: [Yes], [No].
Suspend Time Out (Minute)
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Settings: [Disabled], [1Min], [2 Min], [4 Min], [8
Min], [10 Min], [20 Min], [30 Min], [40 Min], [50 Min], [1 Hour].
Power Button Function
This feature sets the function of the power button. Settings are:
[Power Off]
[Suspend]
Wakeup Event Setup
Press <Enter> and the following sub-menu appears.
PCI Express PME, Resume by PCI Device (PME#)
When set to [Enabled], the feature allows your system to be awakened from the
power saving modes through any event on PME (Power Management Event). Setting
options: [Enabled], [Disabled].
Resume by Ring
An input signal on the serial Ring Indicator (RI) line (in other words, an incoming call
on the modem) awakens the system from a soft off state. Setting options: [Disabled],
[Enabled].
Resume From S3 by USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state. Setting options: [Disabled], [Enabled].
Resume by RTC Alarm
This is used to enable or disable the feature of booting up the system on a scheduled
time/date from the S3, S4, and S5 power off state. Setting options: [Disabled], [Enabled].
Day (of Month) Alarm
The field specifies the date for Resume by RTC Alarm. Settings: [0]~[31].
Time (hh:mm:ss) Alarm
The field specifies the time for Resume by RTC Alarm. Format is <hour><minute>
<second>.
3-18
The power button functions as normal power off button.
When you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.