Installing Software; Install Driver In Windows 2000/Xp - MSI 925XE Neo Platinum User Manual

MS-7053 ATX Mainboard
Install Driver in Windows XP/2000
New Windows XP/2000 Installation
The following details the installation of the drivers while installing Windows XP.
1. Start the installation:
Boot from the CD-ROM. Press F6 when the message "Press F6 if you need
to install third party SCSI or RAID driver" appears.
2. When the Windows Setup window is generated, press S to specify an
Additional Device(s).
3. Insert the driver diskette Intel ICH6R/VIA VT6410 Disk Driver into drive A:
and press <Enter>.
4. Depending on your operating system, choose the driver VIA RAID Controller
(Windows XP), VIA RAID Controller (Windows 2000) which matches
your OS.
5. Press <Enter> to continue with installation or if you need to specify any
additional devices to be installed, do so at this time. Once all devices are
specified, press <Enter> to continue with installation.
6. From the Windows XP/2000 Setup screen, press the <Enter> key. Setup will
now load all device files and then continue the Windows XP installation
Existing Windows XP/2000 Driver Installation
1. Insert the MSI CD into the CD-ROM drive.
2. The CD will auto-run and the setup screen will appear.
3. Under the Driver tab, click on VIA IDE RAID Drivers.
4. The drivers will be automatically installed.
Confirming Windows XP/2000 Driver Installation
1. From Windows XP/2000, open the Control Panel from My Computer
followed by the System icon.
2. Choose the Hardware tab, then click the Device Manager tab.
3. Click the "+" in front of the SCSI and RAID Controllers hardware type. The
driver VIA VT6410 RAID Controller should appear.
6-14

Installing Software