Specifications - dbx PX User Manual

DriveRack
A.3 Specifications
ANALOG INPUTS:
Number of Inputs:
Connectors:
Type:
Impedance:
Max Input Line level:
Input CMRR:
RTA Mic Phantom Voltage:
RTA Mic EIN:
ANALOG OUTPUTS:
Number of Outputs:
Connectors:
Type:
Impedance:
Max Output Level:
A/D PERFORMANCE:
Type:
Dynamic Range:
Type IV dynamic range:
Sample Rate:
D/A PERFORMANCE:
Dynamic Range:
SYSTEM PERFORMANCE:
Dynamic Range:
THD+N:
Frequency Response:
Interchannel Crosstalk:
Crosstalk input to output:
®
PX
®
2 (Stereo) Line inputs
1 RTA Mic input
2 Female XLR line inputs
1 XLR RTA Mic input
Electronically balanced, RF filtered
>40kΩ
+20dBu
>45dB
+15VDC
<-110dBu, 22Hz-22kHz, 150Ω
2 (Stereo) Line outputs
2 Sub outputs (mono or stereo)
2 Male XLR XLR line outputs
2 Male XLR Sub outputs
Electronically balanced, RF filtered
120 Ω
+20dBu
dbx Type IV™ conversion system
110dB A-weighted
107dB unweighted
123dB with transient material,
A-weighted, 22kHz BW
121dB with transient material,
unweighted, 22kHz BW
115dB typical with program material,
A-weighted, 22kHz BW
48kHz
112dB A-weighted
110dB unweighted
110dB A-unweighted,
>107dB unweighted, 0.002% typical at +4dBu,
1kHz, 0dB input gain
20Hz – 20kHz, +/- 0.5dB
<-110dB, 120dB typical
<-100dB
Section A
Appendix