Navigating The Comp/Limiter Section; Navigating The Eq Section - dbx PX User Manual

DriveRack

3.5 Navigating the Comp/Limiter Section

Navigating the Compressor/Limiter Section
From preset mode, press the comp/limiter button to move to either the Compressor or Limiter module(s). Successive presses of COMP/LIMITER button will will toggle between the
Compressor and Limiter modules. Navigate through the Pages of the Compressor module by pressing the
COMP/LIMITER
The Comp/Limiter button
toggles through
the Compressor or
Limiter modules.
COMP/LIMITER

3.6 Navigating the EQ Section

Navigating the "EQ Section"
To edit the parameters of the EQs used in a selected preset, simply use the following procedure. From preset mode,
press the EQ button to reach the EQ module to be edited. Successive presses of the EQ button toggle between the GEQ and the PEQ.
Navigate through the Pages of the selected EQ section by depressing "Next Page" or "Prev Page" successively until arriving at the desired Page.
EQ
The EQ button
toggles through
the EQs used in
each channel of
the selected
preset menu.
®
PX
®
"Next Page" or "Prev Page" buttons successively until you arrive at the desired Page.
Comp On/Off
COMP
Over Easy Off, 1-10
Limiter On/Off
LIMITER
Over Easy Off, 1-10
Threshold -40-20dB
Successive presses of the Data wheel will select
effect parameters within the currently selected page.
GEQ Frequency
On/Off
GEQ
Flatten/Restore Gain -12dB to12dB
or
PEQ On/Off
PEQ
Flatten/Restore
Bell,HSelf, LShelf, LHShelf,
Successive presses of the Data wheel will select
parameters within the currently selected page.
Editing Functions
Threshold -40-20dB
Ratio 1:1 to ∞Inf:1
Gain -20 to 20dB
Band 1 Freq Band 2 Freq
Gain -12dB to12dB Gain -12dB to12dB
Q .20 to 16.0 Q .20 to 16.0
Section 3
COMPRESSOR/LIMITER
GEQ/PEQ
Band 3 Freq
Gain -12dB to12dB
Q .20 to 16.0