dbx PX User Manual page 13

DriveRack
• Rotate the <Data> wheel to select any one of the numerous MAIN speaker options
available. If the speaker being used is not specified in the menu, select CUSTOM. (Note
that you can scroll by category by pressing the Select knob and placing the arrow next to
the category heading above the speaker name. Press the Select knob again to place the
arrow next to the speaker name to scroll by speaker name.) Once you have selected your
Main speaker option, press the <NEXT PG> button and the display will appear as follows:
• Rotate the <Data> wheel to select any one of the numerous SUB speaker options
available. (Note that you can scroll by category by pressing the Select knob and placing
the arrow next to the category heading above the speaker name. Press the Select knob
again to place the arrow next to the speaker name to scroll by speaker name.) Once you
have selected your SUB speaker option, press the <NEXT PG> button.
• You will now be given the option of optimizing your main speakers' levels with the
DriveRack PX. The page will appear something like this:
• Turn the volume (level) knob on each of your main powered speaker(s) to the position
shown in this screen. When you've done this, press the <NEXT PG> button.
• If you're using sub speaker(s), you will now be given the option of optimizing your sub
speakers' levels with the DriveRack PX. The page will appear something like this:
• Turn the volume (level) knob on each of your sub speakers to the position shown in this
screen. When you've done this, press the <NEXT PG> button. (If you're not using sub
speakers, this step will be skipped.)
• The display will now prompt you to load the preset you've just created.
®
PX
®
Getting Started
Section 2