3M 20208 Manual

RANDOM ORBITAL SANDERS MANUAL
12,000 RPM 127 mm (5 in) and 150 mm (6 in)
Please read, understand and follow all safety information contained in these instructions prior to the use of this tool.
Retain these instructions for future reference.
This tool is intended for use in industrial locations, and used only by skilled, trained professionals in accordance with the instructions in
this manual. This pneumatic tool is designed to be used with a backup pad and appropriate abrasive for sanding metals, wood, stone,
plastics and other materials. It should only be used for such sanding applications and within its marked capacity and ratings. Only ac-
cessories specifically recommended by 3M should be used with this tool. Use in any other manner or with other accessories could lead
to unsafe operating conditions.
Do not operate tool in water or in an excessively wet application.
Do not use back-up pads that have a Max RPM or Max OPM less than 2,000. Never use back-up pads that have a weight and/or size
different than what the tool was specifically designed for.
WARNING:
CAUTION:
To reduce the risk of all hazards associated with this tool:
• Read, understand and follow the safety information contained in these instructions prior to the use of this tool.
• Only personnel who are properly trained should be allowed to service this tool.
• Operators and other personnel must wear hearing protection when operating this tool.
• Always wear protection for eyes, ears and respiratory protection while operating this tool. Follow ANSI Z87. or
local/national standards for eyewear and other personal protective equipment requirements.
• Practice safety requirements. Work alert, wear proper attire; never operate tools under the influence of alcohol or drugs or in a
manner inconsistent with its intended use.
• Never allow this tool to be used by children or other untrained personnel.
• Do not leave an unattended tool connected to an air source.
To reduce the risks associated with accessory rupture or disintegration:
• Never exceed marked maximum input pressure (90psi / .62Mpa / 6.2Bars).
• Use care in attaching back-up pad; follow the instructions to ensure that it is securely attached to the tool before use.
• Never free spin the tool or otherwise allow it to be started unintentionally; particularly during damp application.
• Never point this tool in the direction of yourself or another person.
To reduce the risk associated with loud noise:
• Always wear hearing protection while operating this tool. Follow your employer's safety policy for PPE's and/or ANSI Z87. or
local/national standards for eye wear and other personal protective equipment requirements.
• Immediately discontinue use of tool if its noise reduction muffler system has been damaged or is otherwise not functioning
properly. Have tool repaired before placing back into use.
To reduce the risk associated with vibration emissions during use of tool:
• If any physical hand/wrist discomfort is experienced, stop work promptly and seek medical attention. Hand, wrist and arm injury
may result from repetitive work, motion and overexposure to vibration.
3M 5&6 in. ROS
Important Safety Information
Explanation of Signal Word Consequences
Indicates a potentially hazardous situation which, if not avoided, may result in death or serious injury
and/or property damage.
Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate
injury and/or property damage.
Intended Use
WARNING

Original Instructions
Revision 20508