Dv Recording; Use "Easy Guider" To Record Dv Signal - LiteOn LVW-5002 User Manual

Recording

DV recording

Before you to start to record DV contents
This DVD Recorder allows basic DV control functions with the
Remote Control. The DVD Recorder is equipped with a
camcorder control (Play, Stop, FF or Reverse) feature via the DV
Link connection. Simply move the screen cursor to the desired
function and press [ENTER] at DV input screen.

Use "Easy Guider" to record DV signal

1.Power on your TV and this DVD-Recorder.
2.Place a recordable disc on the tray. Make sure
the disc' s label is facing up.
3.Connect the DV cable (IEEE-1394 4-pin cable) to
both the DV Camcorder and the DVD-Recorder.
Notes:
1.The DV-Link input jack on this unit is for use with DV compatible
camcorder only.
2.Only DV signals can be input to the DV-Link jack on this DVD
Recorder.
3.Do not connect a MICRO MV format video camcorder to this DV-
Link (IEEE-1394) jack.
4.You cannot connect more than two pieces of video input sources
at a time to the front panel connector of this DVD-Recorder.
4.Power on the DV Camcorder. Start "Playback
mode" on the DV Camcorder.
5."Pause" the DV Camcorder where you want to
record.
6.Press [ GUIDER] on the remote control. This
actives the Easy Guider menu.
7. Press [p] [q] and to select the "RECORD"
icon, and press [ENTER] to confirm.
8.Press [p] [q] to select "DV" Input, and press
[ENTER] to confirm.
9.Press [p] [q] to select a recording quality and
press [ENTER] to confirm.
10.Press [ENTER] to start recording.
Notes:
This DVD-Recorder will stay in "Pause" mode when no DV input
signal is detected.
11.To pause recording.
Press [ PAUSE ] on the remote control to pause recording .
Press [ PAUSE ] again, if you want to resume recording.
12.To stop recording.
Press [ ]
LVW-5002 model
Before playing a DVD+R disc on compatible equipment, you
will need to finalize the disc.
LVW-5006 model
Before playing a DVD+R/DVD-R/DVD-RW disc on compatible
equipment, you will need to finalize the disc.
19