Table of Contents
Advertisement
Playback
VHS Tape playback
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
Press [
POWER ] to turn on the unit.
Press to turn the unit on or off.
Lights up in red when the power is off.
Press [VHS] to switch the remote control mode
to VCR.
Make sure you press before performing any VCR operations.
When in VCR mode, the button beneath the Cassette Loading
Slot's [
EJECT ] button on the front panel lights each time
you press the [VHS] button.
When the light is:
1. Green: the tape deck is in either "idle" or "playback" mode
and you can press valid keys for the tape deck to function.
2. Orange: the tape deck is in preparation mode and won't
function when you press any keys.
3. Red: the tape deck is in "record" mode. Pressing
[
STOP] stops the tape recording.
Press [
EJECT ] to eject the cassette from
the cassette loading slot.
Press [
PLAY ] to start playback.
Press [
F.F. ] to perform fast forward
scanning.
Press repeatedly to play the disc forward at 2x, 4x, 8x ,16x.
Press [
REW ] to perform fast reverse
scanning.
Press repeatedly to play the disc reverse at 1x, 2x, 4x, 8x, 16x.
Press [ PAUSE] to pause playback.
Press [ PAUSE] again to start "frame by
frame mode".
Press repeatedly to advance DVDs and Video CDs frame by
frame during playback in pause mode.
Press [
PLAY] to restart normal playback .
Press [ DISPLAY ] to display the information of
the video cassette or the unit and the tape
counter.
Press [ TRACK +] or [TRACK -] to adjust the
playback quality
IF picture is distorted or there are noise line on screen during
playback, press TRACK (+/-) to adjust playback quality till it is
acceptable.
Note:
Some instance of poor playback quality may be due to media
conditions that may not be fully correctable.
Hide quick links:
Advertisement
Table of Contents
