Adding New Recordings; Changing Chapter Intervals (Dvd Disc Recording Only); One-Touch Recording; Playback With The Dvd Menu - LiteOn LVC-9015G User Manual

Recording

Adding new recordings

Adding new recording sessions:
Press [RECORD] to start a new recording ses-
sion and press [ STOP] at the point you want
to stop.
Note:
1. For DVD/CD discs only, each new recording session is placed
after the previous session unless a certain recording title is set to
be overwritten.
2.VHS tapes begin recording at the position where it was left. You
must select the desired recording location on the tape.
3.Before you start, please ensure that the disc or the VHS tape
has enough available space for the recording.
Changing Chapter Interval ( DVD disc Recording
only)
Creating chapters while recording
The unit automatically divides a session into chapters by inserting
chapter marks at 5/10/15/20/25/30-minute intervals during the
recording process.
1.Press [SETUP] to display the SETUP menu.
2.Press [ ] [ ] to select "RECORD" and press [ ].
3.Press [ ] [ ] to select "CHAPTER MARK" and
press [ ] . Press [ ] [ ] to set the chapter
interval and [ENTER] for confirmation.
4.When finished, press [SETUP] to exit the
"SETUP" menu and save the settings.
Notes:
1.During DVD disc recording, press [EDIT] to manually add a
chapter mark(s) in a recording session.
One-touch recording (CD/DVD and VHS tape)
Prior to initiating "One-touch recording," you must select
the target recording device. Use " One-touch recording" to
start recording immediately in 30-minute blocks. Press
[RECORD] twice to start a 30-minute recording session. Press
[RECORD] repeatedly to extend recording sessions, up to 6
hours in thirty-minute increments. Pressing [RECORD] when the
timed recording exceeds the 6-hour constraint automatically
turns "one-touch recording" OFF. The length of recording
depends on the current mode of recording quality and the
amount of time available on the disc/VHS tape.
Playback with DVD menu ( for DVD disc record-
ing only)
The DVD Menu displays all the titles (programs) recorded on a disc
and you can select the one you want to play from.
1.Press [ PLAY] or [
Press [DVD] on the remote control to switch to DVD control first.
The "DVD Menu" is displayed when you press [
you press [ GUIDER], "PLAYBACK" and "Play Disc."
2.Press [ ] [ ] to select a title (program) you want to
play and press [ENTER].
To scroll the "DVD Menu" display by page.
Press [ ] [ ] [ ] [ ] to select the "
[ENTER] or press [ NEXT] or [
entire "DVD Menu" advances/returns to the next/previous page.
To switch to "Text View" display
To switch to a text-based Disc Menu, select the "Text View" icon
and press [ENTER]. Only in Text View can you see the full
name of your recorded titles. To switch back to the graphical
menu, select the "Thumbnail View" icon and press [ENTER].
17
GUIDER]
PLAY] or when
" or " " icon to press
PREVIOUS], and the