Chapter 3: Connecting The Presentation Player - Linksys WPG12 User Manual

Back Goes back to the previous slide.
Center Round Button Use like a mouse pad to move the cursor on the
screen.
Left and Right Buttons Use like left and right mouse buttons. Also acts as
Next and Previous slide buttons when in the
Presentation List.
Delete Only way to delete your presentation from the
Player.
Left and Right Arrows Use to navigate left and right when in the
Presentation List.
Up and Down Arrows Use to navigate up and down.
Mode Toggles between high and low resolutions.
6
Instant Wireless Series
TM
Presentation Player
Chapter 3: Connecting the
Presentation Player
1. Connect the VGA cable from your monitor or projector to the Presentation
Player's "TO Monitor/Projector" port.
Figure 3-1
2. Make sure that the Presentation Player is turned off. Plug the supplied
power adapter into the jack on the Presentation Player's back panel. Then,
plug the other end into a power outlet (surge protection recommended).
Turn on the Presentation Player. Only use the power adapter supplied with
the Presentation Player. Use of a different adapter can result in product
damage.
Figure 3-2
7