The Presentation Player's Leds; The Remote Control's Buttons - Linksys WPG12 User Manual

The Presentation Player's LEDs

Power Red. The Power LED will light up when the Presentation
Player is powered on.
WLAN Act Green. The WLAN Act LED blinks when the Presentation
Player is active.
WLAN Link Yellow. The WLAN Link LED indicates the status of the
wireless link. The WLAN Link LED will be lit steadily when
the Presentation Player is connected to the wireless network.
LAN Act Green. The LAN Act LED blinks when the Presentation
Player is active.
LAN Link Yellow. The LAN Link LED indicates the status of the wired
link. The LAN Link LED will be lit steadily when the
Presentation Player is connected to the wired network.
4
Instant Wireless
Figure 2-2
Presentation Player
TM Series

The Remote Control's Buttons

Stop
Play
Pointer
Connect
List
Home
Info
User
Figure 2-2
Use to stop your presentation or connection.
Use to start your presentation from the Presentation List.
Use for the laser pointer.
Use to connect a new user to the Player while in the
Presentation List.
Takes you to the Presentation List.
Takes you to the Home page.
Shows the system information for the Player: the identifica-
tion, network settings, and wireless LAN configuration.
Shows a list of the connected remote users by using the
names of their computers.
5