Package Contents
•
One Instant Wireless
TM
Presentation Player
•
Two Removable Antennas
•
One Power Adapter
•
One Remote Control with Built-in Laser Pointer (two AAA batteries
included)
•
One Setup CD-ROM with User Guide
•
Registration Card and Quick Installation (not shown)
Minimum Requirements
•
One 200 MHz PC Running Windows 98, Me, 2000 or XP
•
One CD-ROM Drive
•
128 Mb Ram
•
802.11b Wireless Adapter or Ethernet Connection (for remote presenta-
tions)
•
Microsoft PowerPoint (needed to Upload presentations to the Presentation
Player)
2
Instant Wireless
Figure 1-1
Presentation Player
TM
Series
Chapter 2: Getting to Know the
Presentation Player
The Presentation Player's Ports
DC-IN
Power Switch
TO Monitor/Projector
Reset
LAN
Figure 2-1
This is the jack where you will connect your power
adapter.
This switch is used for turning the Player on and
off.
At this port, you will connect the VGA cable from
the monitor or projector where your presentation
will be displayed.
To reset the Presentation Player to its factory
default settings, hold the Reset button in for about
ten seconds.
This is where you will connect the Category 5
Ethernet network cable from your PC's Ethernet
adapter.
3