Table 25. Removal steps of system board, DC-in connector, fan, and ExpressCard slot
assembly for ThinkPad X200s and X201s (continued)
Note: Step 1 in only for ThinkPad X201s.
Step
Screw (quantity)
M2 × 3.5 mm, wafer-head, nylon-coated (1) Silver
1
Note: The DC-in connector and the fan assembly are attached to the underside
of the system board.
When installing: Make sure that the DC-in connector and the fan connector are
attached to the system board firmly.
1
Color
2
3
Removing and replacing a FRU
Torque
0.181 Nm
(1.85 kgfcm)
133