Table 24. Removal steps of system board, DC-in connector, fan, and ExpressCard slot
assembly for ThinkPad X200, X201, and X201i (continued)
128
ThinkPad X200, X200s, X200si, X201, X201i, and X201s Hardware Maintenance Manual
Turn the system board over, and then disconnect the DC-in connector and the
fan connector from the system board.
When installing: Make sure that the DC-in connector and the fan connector are
attached to the system board firmly.
Step
Screw (quantity)
M2 × 3.5 mm, flat-head, nylon-coated (1)
5
2
3
4
4
6
Color
Silver
4
5
Torque
0.181 Nm
(1.85 kgfcm)