¹ To replace the head or the hoop rubber, contact either the dealer where you purchased this product, or Roland Support.
Page 3
Connecting to a drum sound module Using the strainer Connect this instrument to a Roland drum sound module that Operate the strainer lever to “attach” the sound module’s snare wires supports a digital connection. to the snare (bottom side; ON) or to “detach” them (OFF).
Adjusting the head tension Performance techniques Be sure to adjust the head tension of the pad before use. The performance techniques differ for the respective drum sound modules. For details, refer to the Owner’s Manual of the drum sound The appropriate amount of tension is one that will provide module.
Page 5
Center versus edge of Position struck on pad pad face face * This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.
Owner’s Damage or malfunction Otherwise, you risk causing For a list of Roland service centers Manual carefully when may result if you fail to malfunction. and official Roland dealers, refer to...
Need help?
Do you have a question about the V-Drums PD-14DSX and is the answer not in the manual?
Questions and answers