Panasonic ES7026-A3 Service Manual
Panasonic ES7026-A3 Service Manual

Panasonic ES7026-A3 Service Manual

Ac/rechargeable shaver

Advertisement

Quick Links

SPECIFICATIONS
CONTENTS
AC/Rechargeable Shaver
ES7026-A3
ES7027-A3
Page
2
2
3
© 2003 Matsushita Electric Works, Ltd. All rights
reserved. Unauthorized copying and distribution is a
violation of law.
ORDER NO. SD0307A47C3
Page
6
10
11

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the ES7026-A3 and is the answer not in the manual?

Questions and answers

Summary of Contents for Panasonic ES7026-A3

  • Page 1: Table Of Contents

    ORDER NO. SD0307A47C3 AC/Rechargeable Shaver ES7026-A3 ES7027-A3 SPECIFICATIONS CONTENTS Page Page 1 SCHEMATIC DIAGRAM 4 CAUTION IN ASSEMBLY 2 WIRING CONNECTION DIAGRAM 5 TROUBLESHOOTING GUIDE 3 DISASSEMBLY INSTRUCTION 6 EXPLODED VIEW & REPLACEMENT PARTS LIST © 2003 Matsushita Electric Works, Ltd. All rights reserved.
  • Page 2: Schematic Diagram

    ES7026-A3 / ES7027-A3 1 SCHEMATIC DIAGRAM 2 WIRING CONNECTION DIAGRAM...
  • Page 3: Disassembly Instruction

    ES7026-A3 / ES7027-A3 3 DISASSEMBLY INSTRUCTION Follow the procedure below to disassemble the main unit. 1. Remove the cap, the outer foil with foil frame and the inner blade. 2. Slide the trimmer handle up to open the trimmer and unhook the trimmer handle by inserting something like a plastic spatula into a slit.
  • Page 4 ES7026-A3 / ES7027-A3 4. To remove the trimmer driving bar or the slit blade driving bar, press bars outward. 5. Loosen a screw and remove the bottom cover. 6. Slide down the side panels for both sides. 7. Loosen two screws and the retaining plate. Remove the waterproof rubber.
  • Page 5 ES7026-A3 / ES7027-A3 9. Take out the housing B. 10. Remove the motor assembly first. And take out the module assembly from housing A. 11. Remove the battery o-ring and washer in each battery. Take out the rechargeable batteries from the chassis.
  • Page 6: Caution In Assembly

    ES7026-A3 / ES7027-A3 4 CAUTION IN ASSEMBLY NOTE: When reassembling, replace the new waterproof rubber. Make sure whether there is NO foreign substance sticking around a part covered with water seal. 4.1. Driving heads Install the driving head A in motor and assemble the driving head B.
  • Page 7 ES7026-A3 / ES7027-A3 4.4. Housing Set the both sides of foil frame release buttons with springs. Put the housing B on the housing A. Tighten the screws with care of pinching screw o-rings.
  • Page 8 ES7026-A3 / ES7027-A3 4.5. Waterproof rubber The waterproof rubber must be fitted the right way around. Install as shown in figure by inserting firmly to the proper position. 4.6. Driving bars Set the trimmer driving bar and the slit blade driving bar.
  • Page 9: Side Panel

    ES7026-A3 / ES7027-A3 4.7. Side panel Set the side panel on the body and slide it up until clicking the hook of panel at three locations. NOTE: Make sure that the left and right side panels are firmly fitted on both rear and front side.
  • Page 10: Troubleshooting Guide

    ES7026-A3 / ES7027-A3 5 TROUBLESHOOTING GUIDE (Refer toWIRING CONNECTION DIAGRAM) <TROUBLE> <CHECK.> <REMEDY> Motor does not rotate. <CHECK POWER CORD UNIT.> NO Replace power cord unit. → → → → Connect the rated voltage to the normal main unit of empty charge capacity →...
  • Page 11: Exploded View & Replacement Parts List

    ES7026-A3 / ES7027-A3 6 EXPLODED VIEW & REPLACEMENT PARTS LIST 6.1. EXPLODED VIEW for ES7026 6.2. REPLACEMENT PARTS LIST for ES7026 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description...
  • Page 12 ES7026-A3 / ES7027-A3 6.3. EXPLODED VIEW for ES7027 6.4. REPLACEMENT PARTS LIST for ES7027 NOTE: *A=available as an optional accessory *B=only available as set *C=available individually Ref. No. Part No. Part Name & Description Remarks Per Unit WES7024X7158 PROTECTIVE CAP...

This manual is also suitable for:

Es7027-a3

Table of Contents