SAFETY INSTRUCTIONS Read all instructions before installing or using this heater. When using electrical appliances, basic precautions should always be followed to reduce the risk of fire, electric shock, and injury to persons, including the following: 1. This heater is hot when in use. To avoid burns, do not let bare skin touch hot surfaces. Keep combustible materials, such as furniture, pillows, bedding, papers, clothes, curtains, etc.
ELECTRICAL SAFETY ● Check the power cord and plug carefully before use, to make sure that they are not damaged. ● If the supply cord is damaged in any way, it must be replaced by the manufacturer or its service agent or a similarly qualified person in order to avoid a hazard.
SPECIFICATIONS Anti-bite Wire Mounting Bracket Iron Base Inlet Air Filter (Removable for cleaning) Controller Model Number DH800A SMART Power Supply 120V/60 Hz Rated Power 800W Cord Length 9.8 Feet/ 3 Meters Item Dimensions 10.6 x 7.7 x 3.1 Inch Item Weight 4.2 Lbs...
INSTALLATION Tools Required (not included): 1. Tape measure 2. Drill 3. Screwdrive 4. Pencil Installation Steps Step 1 Ensure the proper position. Choose a proper position and use a pencil to mark the mounting location. Place the heater as high as possible with a minimum of at least 3 inches from the ceiling.
Page 7
Step 2 Fix the power cord. Use a drill bit drill to bore a hole through the wall of the pet house, and then put the power cord through the hole in the house. Heater Wall Floor Step 3 Attach the heater with screws.
OPERATION Due to dog houses being of different sizes, shapes, insulation values, with varying outside temperatures, etc., reaching the desired temperature will vary greatly, and will also affect the effect of heating. Having insulated walls and preferably a door/flap is very important for keeping your pet house warm.
Page 9
● Timer button “ ” Long press “ ” into the setting mode, short press to set the time: 0-1---24h, and after 5s of no operation, it will confirm and exit the timer setting. Then the display resumes showing the ambient temperature after 5 seconds.
CONNECTION Entering the Wi-Fi connection mode Preparation before connecting preparation: Make sure your Wi-Fi router supports 2.4GHz (NOT 5GHz) and 802.11b/g/n bands. Note: Most 5GHz routers can also be set to 2.4GHz band or dual band. Make sure the Wi-Fi name and password are correct.
Page 11
Step 2 Connect your phone to the 2.4 GHz network your humidifier will use. Open AIRIA and tap the “+” icon in the top right corner. It will appear an added page, click “Go to add”. 800A-WIFI Step 3 Go to the next step.
Page 12
Important note: The heater must be connected to a 2.4 GHz Wi-Fi network. If your router (internet box) broadcasts 2 Wi-Fi bands (2.4GHz and 5GHz), consult your router user manual to learn how to select the 2.4 GHz Wi-Fi band.
Page 13
Control APP 50 °F Ambient Temperature Setting Temperature Timer Setting Child Lock F°/C° Switch Temperature scale ON/OFF...
CLEANING AND MAINTENANCE Regular maintenance is important to the functionality and safety of the unit. The filter must be cleaned per 3 months to keep the unit safe and working normally. To clean and maintain your appliance, please follow below instructions: 1.
WARRANTY 1 YEAR WARRANTY TURBRO provides 1-year limited warranty for TURBRO Neighborhood Heater, from the date of purchase, subject to the following conditions and limitations. What is covered? ● Any alteration misuse of the product will nullify this warranty.
Need help?
Do you have a question about the Neighborhood DH800A SMART and is the answer not in the manual?
Questions and answers