Rs-232C/Rs-422A Protocol - Kyocera Mita FS-1900N Operation Manual

RS-232C/RS-422A Protocol

A protocol is a set of rules the computer follows in sending data to the
printer. The RS-232C/RS-422A parameters are stored in battery backed-up
memory. They are indicated on the status printout. They can be changed by
the FRPO (firmware reprogram) command described in the
Programming Manual
printer. The parameters and their identification codes are given below.
H1: Baud rate
Parameter value
12
24
48
96
19
38
57
11
The factory setting is 9600 baud.
H2: Data bits
7 or 8, factory-set to 8.
H3: Stop bits
1 or 2, factory-set to 1.
H4: Parity
Parameter value
0
1
2
3
The factory setting is "None" (0 on the status printout).
provided on the CD-ROM supplied with the
Baud rate
1200
2400
4800
9600
19200
38400
57600
115200
Meaning
None
Odd
Even
Ignore
C-9
RS-232C/RS-422A Protocol