Advertisement
Quick Links
Advertisement
Subscribe to Our Youtube Channel
Related Manuals for Acer X32
Summary of Contents for Acer X32
- Page 1 Acer OLED Monitor User Guide...
- Page 2 Serial number: ___________________________________ Date of purchase: _________________________________ Place of purchase: ________________________________ Acer and the Acer logo are registered trademarks of Acer Incorporated. Other companies' product names or trademarks are used herein for identification purposes only and belong to their respective companies.
-
Page 3: Information For Your Safety And Comfort
Information for Your Safety and Comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Special notes on OLED monitors The following are normal with the OLED monitor and do not indicate a problem. •... -
Page 4: Warnings
Warnings • Do not use this product near water. • Do not place this product on an unstable cart, stand or table. If the product falls, it could be seriously damaged. • Slots and openings are provided for ventilation to ensure reliable operation of the product and to protect it from overheating. -
Page 5: Potentially Explosive Environments
We at Acer are very conscious of the environmental effects of our business and strive to identify and provide the best working procedures to reduce the environmental impact of our products. -
Page 6: Oled Pixel Statement
OLED pixel statement The OLED unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: •... -
Page 7: Taking Care Of Your Vision
Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain. Eyes •... -
Page 8: Eu Declaration Of Conformity
(“x” = 0~9, a ~ z, A ~ Z, or blank) We, Acer Incorporated, hereby declare under our sole responsibility that the product described above is in conformity with the relevant Union harmonization legislations as below Directive and following harmonized... -
Page 9: Federal Communications Commission Declaration Of Conformity
Acer America Corporation 1730 N First St Suite 400, San Jose, CA 95112 Tel : (408) 533-7700 Fax : (408) 533-4555 Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. -
Page 10: Table Of Contents
Information for Your Safety and Comfort Safety instructions Special notes on OLED monitors Cleaning your monitor Accessibility Safe listening Warnings Using electrical power Product servicing Potentially explosive environments Additional safety information IT Equipment Recycling Information Disposal instructions OLED pixel statement Tips and information for comfortable use Finding your comfort zone Taking care of your vision... - Page 11 Main Menu The Function page TROUBLESHOOTING HDMI/DP Mode (Optional) xiii...
-
Page 12: Package Contents
PACKAGE CONTENTS Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. OLED Monitor Power Cord DP Cable (Optional) USB cable (A to B) HDMI Cable (Optional) Type-C cable (Optional) (Optional) -
Page 13: Attaching The Monitor To The Base
Attaching the monitor to the base 2. Take the Styrofoam with display out of the box. 1. Unpack the box. Take out the Styrofoam side by side and set flat on the desktop. 3. Remove the top styrofoam. 4.Install the stand onto the base and fasten it with the thumb screw from the bottom of the base. -
Page 14: Screen Position Adjustment
SCREEN POSITION ADJUSTMENT To optimize the viewing position, you can adjust the monitor tilt by using both of your hands to hold the edges of the monitor. The monitor can be adjusted to 20 degrees up or 5 degrees down. Tilt 20 - Note: Do NOT press the screen with fingers. -
Page 15: Connecting The Power Cord
CONNECTING THE POWER CORD • This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Connecting the adapter and AC Power cord • Check first to make sure that the power cord you use is the correct type required for your area. -
Page 16: Display Data Channel (Ddc)
Display Data Channel (DDC) To make your installation easier, the monitor is able to Plug and Play with your system if your system also supports DDC protocol. The DDC (Display Data Channel) is a communication protocol through which the monitor automatically informs the host system about its capabilities, for example, supported resolutions and corresponding timing. -
Page 17: 19-Pin Color Display Signal Cable
19-Pin Color Display Signal Cable PIN NO. DESCRIPTION PIN NO. DESCRIPTION DATA2- DATA2+ DATA1- DATA1+ DATA0- DATA0+ DCLK- DCLK+ HDMI_SCL HDMI_SDA HDMI_DET HDMI15V HDMI_HPD... -
Page 18: Standard Timing Table
STANDARD TIMING TABLE Mode Resolution 640 x 480 60 Hz 640 x 480 72 Hz 640 x 480 75 Hz 640 x 480 66.66 Hz VESA 720 x 400 70 Hz 800 x 600 56 Hz 800 x 600 60 Hz SVGA 800 x 600 72 Hz... -
Page 19: Connecting Your Monitor To A Computer
Connecting Your Monitor to a Computer 1. Make sure both the monitor and computer are powered-OFF. 2. Connect DP Cable (Only DP-input model) a. Make sure both the monitor and computer are powered-OFF. b. Connect the DP cable to the computer. 3. -
Page 20: External Controls
External Controls Item Description Power button Press the key to turn on the monitor, while press more than 5 seconds to turn off or short key confirmation. Exit or return to the previous menu. Exit/Left button Down button Move down in the menu. Menu button Enter sub-menus. -
Page 21: Using The Shortcut Menu
Using the Shortcut Menu The following content is for general reference only. Actual product specifications may vary. The OSD (On Screen Display) can be used to adjust the settings of your OLED monitor. Press the key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. - Page 22 Hot key1 (default: Mode) To choose scenario mode (G1, G2, G3) which user-defined profile to use or scenario mode (User, Standard, ECO, Graphics, HDR). Modes Action Racing Sports User Graphics Standard Move Hot key2 (default: Brightness) Open the Brightness control and select the brightness setting. When you are done, use go back one level.
- Page 23 Main Menu The Function page Open the Function page to select a menu function, and adjust the settings which you want using the arrows. You can also view your monitor’s system information from this page. When you are done, use to go back one level.
- Page 24 7. Sniper Mode: Accessibility for games. • Scope Mode • Scope Ratio: To control the content magnification ratio. • Scope Size: To control the scope window size. • Scope with Night Vision: To control the night view effect. • Scope Ratio: Choose scope ratio (1.5x, 2x, 4x), default is 2x. •...
- Page 25 7. Black Boost Pro: The Black Boost Pro is on, it will compensate for the brightness of the dark level, so that the objects under the dark level can be clearly seen. Note: • Black Boost Pro default is "Off". •...
- Page 26 Picture Sports 3840X2160 DP ALT Input Mode Resolution FreeSync Premium Game Assistant Brightness Gaming Contrast Picture Black Boost Color Super Sharpness Audio Max Brightness System Information Move Enter Back 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Picture from the OSD.
- Page 27 8. Super Sharpness: technology can simulate high-resolution images by boosting the pixel density of the original source. It can make images sharper and clear. 9. Max Brightness: Default is off. Note: Due to environmental considerations, the default brightness of the display will be low.
- Page 28 Audio 3840X2160 Sports DP ALT Input Mode Resolution FreeSync Premium Game Assistant Volume Gaming Mute Picture Color Audio System Information Move Enter Back 1. Press the MENU key to open the OSD. 2. Toggle the joystick to the up or down to select Audio from the OSD.
- Page 29 8. OSD Lock: OSD Lock function is used to prevent OSD button from being pressed accidentally. Note: 1. OSD Locked: Set the OSD Lock to "On" from the OSD and press "Enter". The "OSD Locked" message will appear in the middle of the screen, and LED lights will indicate as blinking blue.
- Page 30 7. Wide Mode: You can select which screen aspect you are using. The options are Full, Aspect, 1:1 and 21:9. 8. PIP/PBP: The options for PIP/PBP Mode are Off, PIP Large, PIP Small, and PBP. You can also adjust the PIP Position, Sub Source, Source Swap, and Audio Source. Note: PIP/PBP is not supported while FreeSync Premium is "On".
- Page 31 16. Power-off USB Charge: Select "On" to supply power to the USB port and select "Off" to turn on DC off/Power saving mode. Note: 1. To comply with international energy standards, this display is currently set to power saving mode, which disables certain functions when display is put to sleep (standby) and has power off (DC off) status.
- Page 32 Information Sports DP ALT 3840X2160 Input Mode Resolution FreeSync Premium Game Assistant Main Source DP ALT Gaming Resolution Picture 3840X2160 Color H/V Frequency H:89KHz V:60Hz Audio Mode SDR Normal System Series Number Information MMT J8EE001236000013900 Reset All Settings Move Enter Exit 1.
-
Page 33: Troubleshooting
Recycling Information for the United States of America Acer encourages information technology (IT) equipment owners to responsibly recycle their equipment when it is no longer needed. Acer offers programs and services to assist equipment owners with this process. For more information on recycling IT equipment, please go to: https://www.acer.com/ac/en/US/content/recycling...
Need help?
Do you have a question about the X32 and is the answer not in the manual?
Questions and answers