Metronome; Adjusting Tempo; Tap Tempo - Kurzweil Mark-Pro TWOi User Manual

Metronome

Metro / Rhythm
+
/ No
/ Yes
Metro / Rhythm
Play / Stop

Tap Tempo

+
/ No
/ Yes
Tap Tempo
Use the metronome when playing or recording to hear the desired tempo.
Press the Metro/Rhythm button to be in Rhythm Selection mode where you
can also select Metronome. When you press the Metro/Rhythm button, you
can choose one of the 64 built in rhythms of which the first 4 rhythms are
metronomes.
In other words, press the Mtero/Rhythm button, and press -/No or +/Yes
button until you can see 2/4, 3/4, 4/4, or 6/8 on the display.
Press the Metro/Rhythm button again to get out of rhythm selecting mode
and press Play/Stop button to play the metronome at the selected time
signature.

Adjusting Tempo

The tempo of the metronome may vary from 40 to 280 beats per minute.
Hold down Tap Tempo and press -/No or +/Yes button to increase or
decrease tempo. Default value is set to 120 bpm.
Tap Tempo
Tap Tempo is another way of adjusting tempo. The Tap Tempo button allows
you to enter the desired tempo just by tapping it twice at the tempo.
When the metronome is playing, tap the Tap Tempo button at the desired
tempo twice. The metronome will change to the tempo you have just tapped.
When nothing is playing, tap the Tap Tempo button 4 times. The rhythm will
start playing. If you want to start the metronome in this way, you should
select one of the 4 metronomes (2/4, 3/4, 4/4, or 6/8) using
Metro/Rhythm and -/No, +/Yes buttons before tapping and get out of the
selecting mode by pressing the Metro/Rhythms button once more.
Metronome 33