Assembling The Stand - Kurzweil Mark-Pro TWOi User Manual

Assembling the Stand

Side Panel and Pedal Assembly
Rear Panel Assembly
8 Installation
Be careful when placing the keyboard on the stand. Do not push down or pull
forward the keyboard without tightening all the screws on the stand,
2
3
4
10
10
5
8
1. Place pedal box 4 on the left side
panel 2 and fasten the screw 10 on the
hole.
2. Put on the right side panel 3 in the same
way.
3. Take out the pedal cable from inside of
the pedal box 4.
1. Fit the rear panel 5 into the side panel
8
brackets and fasten the screws 8.
2. After fastening all four screws of 8,
fasten the screws 11 to lock to the
pedal box.
11
11